Developing a Smok Pen
The Smok Pen is a revolutionary vaporizing pen which allows for a write-to-write experience, whilst you are away from home. This is because of the unique design of the pen. It has two tanks, one smaller compared to the other, that house the e juice and charged batteries. Once the user wants to write, he just places the pen into the smaller tank and places the ink in the chamber where it will be vaporized. He simply turns on the pen and writes as though he is writing under a black mirror.
One of the biggest attributes of the Smok Pen is its ability to charge while it is on your own desk. For the Electric Tobacconist reason that the coils on the Smok Pen are designed in a way to help keep the e juice from dripping onto the table or somewhere else. This is due to the 0.3-ohm coil that is placed in the Smok Pen. The 0.3-ohm coil ensures that even the slightest of air currents won’t affect the writing process. The reason being the electronic circuitry has protection built in so that it will never be suffering from extremely low voltage electric currents.
The Smok Pen could be charged internally with a charger or via the USB connection that comes with it. Because the electronic circuitry has a safety barrier built in, therefore there is no risk involved when charging the device through the computer. The Smok Pen includes a charging capacity of sixteen 50 mah batteries, that is ideal for all pens that use a couple of batteries.
In order to keep the Smok Pen doing work for an extended time frame it is important you don’t overcharge the battery. Overcharging the battery will certainly reduce the voltage that is available and may eventually bring about the device malfunctioning. Overcharging the Smok Pen could also affect the vaporizing process. If you feel that your battery isn’t getting the vapor it will, remove the pen from the energy source and let it cool off for a couple minutes.
The fire button on the Smok Pen is located in the bottom right corner of the device. The fire button comes with an orange light, which indicates that it is on. It is possible to press this button to activate the electronic heating element that may let you vaporize the oil. When you have done so you can take away the coil from the holder and place it in to the holder and place the Smok Pen in to the airflow chamber, that may cause the heating element to start heating up and burning off the wick.
When the coil is taken off the holder the airflow chamber is ready for the sub-ohm cartridge. The coils are placed inside the holder and they get heated from the airflow. Once they get hot they start to turn blue, that is the indication that it is ready for the pen’s battery. Make sure that you place your sub-ohm in to the chamber before you push the fire button. If you do not put the coil into the airflow chamber then your oil will leak and cause the leaking of e-juice.
Before you put the battery into the pen, you must ensure that you have disconnected all of the leads. Then you have to remove the Smok Pen’s cap and locate the leak or drip tip. You need to clean this with a little cotton bud, so that you could eliminate leak. Then reattach the cap back to the Smok Pen and you also are ready to place the battery in to the pen.
The final area of the construction process is the adapter plate, which fits into the Smok Vaporizer’s USB port. This plate allows you to charge your e-juice through your computer, as long as you have an adapter for USB connection. I really like this part since it allows me to charge my entire kit simultaneously without worrying about running out of power or constantly running out of e-juice.